As the title suggest, we are going to explore networking for Virtual (guest) machines and host machine, for NAT interface and Host Only interface. I will be covering Bridge networking in a later post. To start with, I am going to list a few concepts for better understanding of kvm networking. Lets go through the type of networks a Virtual Machine can be attached to:
-
Host-Only: The VM will be assigned a IP which is only accessible by the host machine where the VM is running on. Only the host machine can talk to the VM, no other host can access it.
-
NAT: The VM will be assigned a IP on different subnet that the host machine, but the VM has ability to talk to ouside network just like the host machine, but hosts from outside cannot access to your VM directly.
-
Bridged: The VM will be in the same network as your host, if your host IP is 192.168.100.25 then your VM will be like 192.168.100.30. It can be accessed by all computers in your host network.
The below interfaces will be noticed on the host machine:
virbr is a virtual bridge interfaces provided by libvirt library. It’s acts as a bridge, to switch packets (at layer 2) between the interfaces (real or other) that are attached. There is a gateway IP attached to this virtual bridge which is visible on the host machine. The bridge is connected to a virtual router which provides DHCP which basically gives the virtual machine an IP address on that subnet to which the bridge is connected.
vnet interfaces is a type of virtual interface called tap interfaces. It is attached to a qemu-kvm process for reading-writing data between the host and the VM. A vnet will be added to a bridge interface for plugging the VM into virtual network.
- Lets first go through the default network on my host machine
root@amol-hp-elite:~# virsh net-list --all
Name State Autostart Persistent
----------------------------------------------------------
default active yes yes- Get details of default network
root@amol-hp-elite:~# virsh net-info default
Name: default
UUID: 8f7e6477-61df-4468-83fc-966d41d22302
Active: yes
Persistent: yes
Autostart: yes
Bridge: virbr0- Let see the virtual bridge interface
root@amol-hp-elite:~# brctl show
bridge name bridge id STP enabled interfaces
virbr0 8000.52540035ac06 yes virbr0-nic
vnet0
vnet1virbr0 virtual bridge is attached to interface vnet0 & vnet1
- Let see what type of network is configured on default network
root@amol-hp-elite:~# virsh net-dumpxml default
<network connections='1'>
<name>default</name>
<uuid>8f7e6477-61df-4468-83fc-966d41d22302</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr0' stp='on' delay='0'/>
<mac address='52:54:00:35:ac:06'/>
<ip address='192.168.122.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.122.2' end='192.168.122.254'/>
</dhcp>
</ip>
</network>The output indicates that default network is configured a forward for NAT. Hence the VM on this network should be able to connect to outside networks.
- Check the VM’s and IP’s assigned on this network
root@amol-hp-elite:~# virsh net-dhcp-leases default
Expiry Time MAC address Protocol IP address Hostname Client ID or DUID
-------------------------------------------------------------------------------------------------------------------
2018-01-21 12:56:45 52:54:00:58:e4:7f ipv4 192.168.122.113/24 ubuntu1404 -
2018-01-21 12:56:45 52:54:00:ae:45:66 ipv4 192.168.122.181/24 node-1 -Now lets track steps to create another NAT network and a Host-Only network
- Create a network configuration xml for NAT network
root@amol-hp-elite:~# cat nat.xml
<network>
<name>natntw</name>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr1' stp='on' delay='0'/>
<ip address='192.168.100.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.100.10' end='192.168.100.254'/>
</dhcp>
</ip>
</network>We have defined the network name, network mode is set to NAT, a new bridge named as virbr1, network gateway, network subnet mask and IP range.
- Define the new network
root@amol-hp-elite:~# virsh net-define nat.xml
Network natntw defined from nat.xmlNetwork bridge details are setup as soon as the new network is defined.
root@amol-hp-elite:~# virsh net-info natntw
Name: natntw
UUID: 0c3b9a99-c14c-4317-84c4-e2fe245becbc
Active: no
Persistent: yes
Autostart: no
Bridge: virbr1 - Start the network
root@amol-hp-elite:~# virsh net-start natntw
Network natntw started This should start the virtual bridge virbr1 on the host machine
8: virbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:b8:ff:b7 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1
valid_lft forever preferred_lft forever - Set network to autostart
root@amol-hp-elite:~# virsh net-autostart natntw
Network natntw marked as autostarted- I am going to repeat the above steps to create a host-only (isolated) network for VMs using the below xml file
root@amol-hp-elite:~# cat hostonly.xml
<network>
<name>hostntw</name>
<bridge name='virbr2' stp='on' delay='0'/>
<ip address='192.168.110.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.110.10' end='192.168.110.254'/>
</dhcp>
</ip>
</network>- Virtual bridge virbr2 is started after starting the host only network - hostntw
root@amol-hp-elite:~# ip a | grep virbr2 -A 7
10: virbr2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:48:7b:d9 brd ff:ff:ff:ff:ff:ff
inet 192.168.110.1/24 brd 192.168.110.255 scope global virbr2
valid_lft forever preferred_lft forever
11: virbr2-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr2 state DOWN group default qlen 1000
link/ether 52:54:00:48:7b:d9 brd ff:ff:ff:ff:ff:ff- Lets list all the virtual networks
root@amol-hp-elite:~# virsh net-list
Name State Autostart Persistent
----------------------------------------------------------
default active yes yes
hostntw active yes yes
natntw active yes yesNEXT - Let’s see the behaviour of a VM on Host-Only Network
- Spawning a VM on hostntw - our Host-Only network
root@amol-hp-elite:~# virt-install --name node-2 --vcpus=1 --memory 512 --disk path=/var/lib/libvirt/images/trusty-server-cloudimg-amd64-disk1-node2.i
mg,bus=virtio,cache=writeback --disk path=/var/lib/libvirt/images/config-drive-node2.iso,device=cdrom --graphics vnc,listen=0.0.0.0 --network bridge:v
irbr2,model=virtio --noautoconsole --os-type=linux --boot=hd
WARNING No operating system detected, VM performance may suffer. Specify an OS with --os-variant for optimal results.
Starting install...
Creating domain... | 0 B 00:00:00
Domain creation completed. As we are aware that virbr2 is the bridge attached to hostntw, we should get an interface attached on hostntw connected to the VM’s process.
root@amol-hp-elite:/var/lib/libvirt/images# brctl show virbr2
bridge name bridge id STP enabled interfaces
virbr2 8000.525400487bd9 yes virbr2-nic
vnet2The vnet2 interface is attached to the VM - node-2
root@amol-hp-elite:~# virsh dumpxml node-2 | grep vnet -B 3 -A 4
<interface type='bridge'>
<mac address='52:54:00:d7:8d:61'/>
<source bridge='virbr2'/>
<target dev='vnet2'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>IP assigned to VM on hostntw
root@amol-hp-elite:/var/lib/libvirt/images# virsh net-dhcp-leases hostntw
Expiry Time MAC address Protocol IP address Hostname Client ID or DUID
-------------------------------------------------------------------------------------------------------------------
2018-01-21 14:26:15 52:54:00:d7:8d:61 ipv4 192.168.110.116/24 node-2 -I am able to ssh to the VM but cannot ping outside the VM’s hostonly network.
root@amol-hp-elite:~# ssh -i /home/amol/.ssh/id_rsa ubuntu@192.168.110.116
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-139-generic x86_64)
* Documentation: https://help.ubuntu.com/
System information as of Sun Jan 21 07:57:53 UTC 2018
System load: 0.05 Processes: 71
Usage of /: 36.5% of 2.13GB Users logged in: 0
Memory usage: 10% IP address for eth0: 192.168.110.116
Swap usage: 0%
Graph this data and manage this system at:
https://landscape.canonical.com/
Get cloud support with Ubuntu Advantage Cloud Guest:
http://www.ubuntu.com/business/services/cloud
0 packages can be uppubDate:d.
0 uppubDate:s are security uppubDate:s.
Last login: Sun Jan 21 07:57:56 2018 from 192.168.110.1
ubuntu@node-2:~$ ping google.com
ping: unknown host google.com NEXT - Attach a NAT interface to an existing VM to reach outside network
We will attach a NAT interface/network to the existing VM, node-2 to reach outside through the NAT interface. I will be using the newly created natntw network having the IP subnet 192.168.100.XXX to accomplish the same.
root@amol-hp-elite:~# virsh net-info natntw
Name: natntw
UUID: 0c3b9a99-c14c-4317-84c4-e2fe245becbc
Active: yes
Persistent: yes
Autostart: yes
Bridge: virbr1
root@amol-hp-elite:~# virsh net-dhcp-leases natntw
Expiry Time MAC address Protocol IP address Hostname Client ID or DUID
-------------------------------------------------------------------------------------------------------------------
root@amol-hp-elite:~# brctl show virbr1
bridge name bridge id STP enabled interfaces
virbr1 8000.525400b8ffb7 yes virbr1-nic
- Attached natntw to VM node-2
root@amol-hp-elite:~# virsh attach-interface --domain node-2 --type bridge --source virbr1 --model virtio --config
Interface attached successfully Please note - I had to restart the VM, as restarting networking did not work, maybe because I had ssh’ed in the VM using eth0
Virtual bridge got an vnet3 interface attached for the VM node-2 for network natntw
root@amol-hp-elite:~# brctl show virbr1
bridge name bridge id STP enabled interfaces
virbr1 8000.525400b8ffb7 yes virbr1-nic
vnet3 IP from natntw network was assigned to the VM
root@amol-hp-elite:~# virsh net-dhcp-leases natntw
Expiry Time MAC address Protocol IP address Hostname Client ID or DUID
-------------------------------------------------------------------------------------------------------------------
2018-01-21 14:56:36 52:54:00:c6:3c:03 ipv4 192.168.100.197/24 node-2 - - Test outside connectivity from inside the VM
root@amol-hp-elite:~# ssh -i /home/amol/.ssh/id_rsa ubuntu@192.168.110.116
Welcome to Ubuntu 14.04.5 LTS (GNU/Linux 3.13.0-139-generic x86_64)
* Documentation: https://help.ubuntu.com/
System information as of Sun Jan 21 08:26:31 UTC 2018
System load: 0.0 Memory usage: 9% Processes: 52
Usage of /: 36.5% of 2.13GB Swap usage: 0% Users logged in: 0
Graph this data and manage this system at:
https://landscape.canonical.com/
Get cloud support with Ubuntu Advantage Cloud Guest:
http://www.ubuntu.com/business/services/cloud
0 packages can be uppubDate:d.
0 uppubDate:s are security uppubDate:s.
Last login: Sun Jan 21 08:09:43 2018 from 192.168.110.1
ubuntu@node-2:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:d7:8d:61 brd ff:ff:ff:ff:ff:ff
inet 192.168.110.116/24 brd 192.168.110.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fed7:8d61/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:c6:3c:03 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.197/24 brd 192.168.100.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fec6:3c03/64 scope link
valid_lft forever preferred_lft forever
ubuntu@node-2:~$ ping google.com
PING google.com (172.217.27.206) 56(84) bytes of data.
64 bytes from bom07s15-in-f14.1e100.net (172.217.27.206): icmp_seq=1 ttl=52 time=30.4 ms
64 bytes from bom07s15-in-f14.1e100.net (172.217.27.206): icmp_seq=2 ttl=52 time=69.5 ms
64 bytes from bom07s15-in-f14.1e100.net (172.217.27.206): icmp_seq=3 ttl=52 time=52.8 ms
^C
--- google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 30.477/50.960/69.533/16.003 ms
Ping to google.com is now working as it connecting to outside network using the newly attached NAT interface on VM’s eth1.
- Reference Links
https://kashyapc.fedorapeople.org/virt/create-a-new-libvirt-bridge.txt
https://jamielinux.com/docs/libvirt-networking-handbook/nat-based-network.html